Shield-Bright 309LMo

ESAB

Shield-Bright 309LMo

The following items have been added to your list


x

Shield-Bright 309LMo was designed for welding type 316 clad steels on the first pass in cladding steels or for welding dissimilar metals such as molybdenum-containing austenitic stainless steels to carbon steels. It is used in paper mills and in power plants to give greater corrosion resistance. This wire performs best when used out-of-position shielded with either Argon/C02 or 100% C02.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded c1 shielding gas
20 J (15 ft-lb) -196 degC (-321 degF)
50 J (37 ft-lb) -29 degC (-20 degF)

Typical Tensile Properties

ElongationShielding GasTensile Strength Yield Strength
30 %C1 Shielding Gas620 MPa (90 ksi)480 MPa (70 ksi)

Deposition Data

Current 130-220 A
Deposition Rate 4-10 lb/h
Deposition Rate 1.9-4.6 kg/h
Diameter 0.045 in.
Diameter 1.2 mm
Voltage 24-29 V
Wire Feed Speed 228-567 in./min
Wire Feed Speed 5.8-14.4 m/min

Classifications

Weld Metal SFA/AWS A5.22 : E309LMoT1-1
SFA/AWS A5.22 : E309LMoT1-4
JIS Z 3323 : TS309LMo-FB1
KS D 3612 : YF309MoLC
EN ISO 17633-A : T 23 12 2 L P C1 2
EN ISO 17633-A : T 23 12 2 L P M21 2

Approvals

Approvals DNV-GL VL 309MoL
KR RW 309MoLG(C)
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type C Cr Ni Mo
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Mo Ni P S Si
C1 Shielding Gas
0.029 % 22.90 % 1.0 % 2.60 % 12.7 % 0.024 % 0.008 % -
C1 shielding gas
- - - - - - - 0.70 %
M21 Shielding Gas
0.030 % 23.5 % 1.2 % 2.60 % 13.0 % 0.024 % 0.008 % 0.75 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Shield-Bright 309LMo
35EA12560V FIND A DISTRIBUTOR
35EA12982V FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..