OK Autrod 308LSi

ESAB

OK Autrod 308LSi

The following items have been added to your list


x

A continuous solid corrosion resisting chromium-nickel wire for welding of austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. OK Autrod 308LSi has a good general corrosion resistance. The alloy has a low carbon content making it particularly recommended where there is a risk of intergranular corrosion. The higher silicon content improves the welding properties, such as wetting. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded
45 J (33 ft-lb) -196 degC (-321 degF)
70 J (52 ft-lb) -60 degC (-76 degF)
110 J (81 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

Condition As Welded As Welded
Shielding Gas Tested at 350°C.
Tensile Strength 570 MPa (83 ksi) 490 MPa (71 ksi)
Yield Strength 400 MPa (58 ksi) 370 MPa (54 ksi)
Elongation 36 % 25 %

Recommended Welding Parameters

Wire Diameter
0.6 mm (0.025 in.)
1.14 mm (0.045 in.)

Deposition Data

Current Deposition Rate Diameter Voltage Wire Feed Speed
55-160 A 1.0-4.1 kg/h (2-9 lb/h) 0.8 mm (0.030 in.) 15-24 V 4.0-17.0 m/min (157-669 in./min)
65-220 A 1.1-5.4 kg/h (2-11 lb/h) 0.9 mm (0.035 in.) 15-28 V 3.5-18.0 m/min (138-709 in./min)
80-240 A 1.5-6.0 kg/h (3-13 lb/h) 1.0 mm (0.040 in.) 15-28 V 4.0-16.0 m/min (157-630 in./min)
100-300 A 1.6-7.5 kg/h (3-16 lb/h) 1.2 mm (0.047 in.) 15-29 V 3.0-14.0 m/min (118-551 in./min)
230-375 A 5.2-8.6 kg/h (11-19 lb/h) 1.6 mm (1/16 in.) 23-29 V 5.5-9.0 m/min (217-354 in./min)

Classifications

Wire Electrode SFA/AWS A5.9 : ER308LSi
Werkstoffnummer : ~1.4316
EN ISO 14343-A : G 19 9 L Si

Approvals

Approvals BV 308L SA BT (M12)
CE EN 13479
CWB ER308LSi
DB 43.039.01
DNV-GL VL 308 L (M13)
NAKS/HAKC 0.8-1.2 mm
VdTÜV 04267
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C - High Si

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu Mn Mo Ni P S Si Si+Fe
0.01 % 19.9 % 0.10 % 1.8 % 0.15 % 10.5 % - - 0.9 % 9 %
Typical Weld Metal Analysis %
0.01 % 20 % 0.1 % 1.8 % 0.1 % 10 % 0.015 % 0.015 % 0.8 % -
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 308LSi
1612064600 FIND A DISTRIBUTOR
1612089500 FIND A DISTRIBUTOR
1612089820 FIND A DISTRIBUTOR
1612089300 FIND A DISTRIBUTOR
1612084600 FIND A DISTRIBUTOR
1612099500 FIND A DISTRIBUTOR
1612099820
1612099320 FIND A DISTRIBUTOR
161209937U FIND A DISTRIBUTOR
1612094600 FIND A DISTRIBUTOR
1612109500 FIND A DISTRIBUTOR
1612109820 FIND A DISTRIBUTOR
1612109890 FIND A DISTRIBUTOR
1612109320 FIND A DISTRIBUTOR
161210932U FIND A DISTRIBUTOR
1612109370 FIND A DISTRIBUTOR
1612109A00 FIND A DISTRIBUTOR
1612104600 FIND A DISTRIBUTOR
1612119820
161211982Q FIND A DISTRIBUTOR
1612119320 FIND A DISTRIBUTOR
1612119500 FIND A DISTRIBUTOR
1612129820 FIND A DISTRIBUTOR
1612129320 FIND A DISTRIBUTOR
1612129370 FIND A DISTRIBUTOR
1612169820 FIND A DISTRIBUTOR
1612169410 FIND A DISTRIBUTOR
1612169420 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..