OK Autrod 316LSi

ESAB

OK Autrod 316LSi

The following items have been added to your list


x

A continuous, solid, corrosion-resistant, chromium-nickel-molybdenum wire for welding austenitic stainless alloys of the 18% Cr -8% Ni and 18% Cr -10% Ni -3% Mo types. OK Autrod 316LSi has good general corrosion resistance; in particular, the alloy has very good resistance to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The higher silicon content improves the welding properties such as wetting. The alloy is widely used in the chemical and food processing industries, as well as in shipbuilding and various types of architectural structure.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded
70 J (52 ft-lb) -110 degC (-166 degF)
45 J (33 ft-lb) -196 degC (-321 degF)
95 J (70 ft-lb) -60 degC (-76 degF)
120 J (89 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

Condition As Welded As Welded
Shielding Gas Tested at 350°C.
Tensile Strength 560 MPa (81 ksi) 440 MPa (64 ksi)
Yield Strength 400 MPa (58 ksi) 340 MPa (49 ksi)
Elongation 37 % 26 %

Recommended Welding Parameters

Wire Diameter
0.6 mm (0.025 in.)
1.14 mm (0.045 in.)

Deposition Data

Current Deposition Rate Diameter Voltage Wire Feed Speed
65-220 A 1.1-5.4 kg/h (2-11 lb/h) 0.9 mm (0.035 in.) 15-28 V 3.5-18.0 m/min (138-709 in./min)
80-240 A 1.5-6.0 kg/h (3-13 lb/h) 1.0 mm (0.040 in.) 15-28 V 4.0-16.0 m/min (157-630 in./min)
100-300 A 1.6-7.5 kg/h (3-16 lb/h) 1.2 mm (0.047 in.) 15-29 V 3.0-14.0 m/min (118-551 in./min)
230-375 A 5.2-8.6 kg/h (11-19 lb/h) 1.6 mm (1/16 in.) 23-31 V 5.5-9.0 m/min (217-354 in./min)
55-160 A 1.0-4.1 kg/h (2-9 lb/h) 0.8 mm (0.030 in.) 12-24 V 4.0-17.0 m/min (157-669 in./min)

Classifications

Wire Electrode SFA/AWS A5.9 : ER316LSi
Werkstoffnummer : ~1.4430
EN ISO 14343-A : G 19 12 3 L Si

Approvals

Approvals CE EN 13479
CWB ER316LSi
DB 43.039.05
DNV-GL VL 316 L (M13)
NAKS/HAKC 0.8-1.2 mm
VdTÜV 04268
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C - High Si

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu Mn Mo Ni P S Si Si+Fe
0.01 % 18.4 % 0.12 % 1.8 % 2.60 % 12.2 % - - 0.9 % 7 %
Typical Weld Metal Analysis %
0.02 % 18.5 % 0.1 % 1.8 % 2.7 % 12 % 0.015 % 0.015 % 0.8 % -
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 316LSi
1632064600 FIND A DISTRIBUTOR
1632089500 FIND A DISTRIBUTOR
1632089820 FIND A DISTRIBUTOR
1632082110 FIND A DISTRIBUTOR
1632084600 FIND A DISTRIBUTOR
1632099820
1632094600 FIND A DISTRIBUTOR
1632109500 FIND A DISTRIBUTOR
1632109820 FIND A DISTRIBUTOR
1632109890 FIND A DISTRIBUTOR
163210247V FIND A DISTRIBUTOR
163210932U FIND A DISTRIBUTOR
1632109320 FIND A DISTRIBUTOR
1632104600 FIND A DISTRIBUTOR
1632119820
1632119320 FIND A DISTRIBUTOR
1632129500 FIND A DISTRIBUTOR
1632129820 FIND A DISTRIBUTOR
163212932U FIND A DISTRIBUTOR
1632129320 FIND A DISTRIBUTOR
1632129370 FIND A DISTRIBUTOR
163212342W FIND A DISTRIBUTOR
1632129A00 FIND A DISTRIBUTOR
1632169820 FIND A DISTRIBUTOR
163216342W FIND A DISTRIBUTOR
1632169410 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..