Stoody ThermaClad 105B
ThermaClad 105B deposit has very good resistance to metal-to-metal-wear. The deposits are readily machinable with carbide tools. Multiple layer, crack-free deposits can be obtained. When more than four layers are required, an underbase of ThermaClad 104 is recommended. Deposits are difficult to flame cut.
Typical Tensile Properties
Deposition Data
| Current | Deposition Type | Diameter | TTW Dist. | Voltage |
| 350-400 A | Full Range | 3.2 mm (1/8 in.) | 25-38 mm (1-1 1/2 in.) | 28-30 V |
| 350-400 A | Subarc | 3.2 mm (1/8 in.) |
Typical Weld Metal Analysis %
| C | Cr | Fe | Other |
| 0.5 % | 3.5 % | BAL % | 4.5 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.