OK Tigrod 4047

ESAB

OK Tigrod 4047

The following items have been added to your list


x

OK Tigrod 4047 was originally developed as a brazing alloy to take advantage of its low melting point and narrow freezing range. In addition, it has higher silicon content than OK Tigrod 4043, which provides an increased fluidity and reduced shrinkage. Hot cracking is significantly reduced when using OK Autrod 4047 as a filler alloy. The alloy may be used in applications of sustained elevated temperatures. Non-heat treatable.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded12 %124 MPa (18 ksi)55 MPa (8 ksi)

Classifications

Wire Electrode EN ISO 18273 : S Al 4047 (AlSi12)
SFA/AWS A5.10 : R4047

Approvals

Grade AWS A5.10
Society CWB
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Alloyed aluminium (Al + 12 % Si)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cu Fe Mn Si Zn
Rem % 0.01 % 0.18 % 0.01 % 11.5 % 0.01 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 4047
180516R120 FIND A DISTRIBUTOR
180516R150 FIND A DISTRIBUTOR
180520R150 FIND A DISTRIBUTOR
180520R120 FIND A DISTRIBUTOR
180524R120 FIND A DISTRIBUTOR
180524R150 FIND A DISTRIBUTOR
180532R120 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..