OK Tigrod 308L

ESAB

OK Tigrod 308L

The following items have been added to your list


x

OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C. Can also be used for welding of Cr-steels except in sulphur rich environments.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded
80 J (59 ft-lb) -196 degC (-321 degF)
135 J (99.5 ft-lb) -80 degC (-112 degF)
170 J (125 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

ElongationTensile Strength Yield Strength
36 %610 MPa (88.5 ksi)480 MPa (70 ksi)

Classifications

Wire Electrode Werkstoffnummer : ~1.4316
SFA/AWS A5.9 : ER308L
EN ISO 14343-A : W 19 9 L

Approvals

Approvals CE EN 13479
CWB ER308L
DNV-GL VL 308 L
NAKS/HAKC 1.6-2.4 mm
VdTÜV 04269
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu FN WRC-92 Mn Mo N Ni P S Si
0.02 % 19.8 % 0.15 % 9 % 1.9 % 0.20 % 0.05 % 9.8 % - - 0.4 %
Typical Weld Metal Analysis %
0.01 % 20 % 0.1 % - 1.8 % 0.1 % - 10 % 0.020 % 0.015 % 0.4 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 308L
161010R150 FIND A DISTRIBUTOR
161012R150 FIND A DISTRIBUTOR
161016R150 FIND A DISTRIBUTOR
161020R150 FIND A DISTRIBUTOR
161024R150
161032R150 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..